. “The device works perfectly. The drivers installed automatically and there was nothing to do but figure out my speakers.

I had outstanding support service from Plugable’s tech who checked everything and helped me get my speakers to pair up. Couldn’t be more pleased.” –. “This tiny USB bluetooth has huge capabilities. It easily fits into a USB port, then pairs and connects to any bluetooth device.

Plugable sends a link by e-mail to the latest driver even before the bluetooth arrives. And the packaging doesn’t require any cutting; it just snaps open. I bought this because I have another Plugable device — a USB 3.0 hub — that also works as advertised. You can’t go wrong with Plugable products.” – Features. Adds Bluetooth® wireless technology support for Windows® 7 and later, Linux PCs, and Raspberry Pi. Extremely compact USB adapter.

Safe to leave in for laptop travel. Supports Bluetooth input devices like keyboards, mice, and game controllers.

Supports Bluetooth audio devices like stereo headsets, headphones, and speakers. Basic hardware support built-in to Linux kernels 3.0.34 and higher (profile support is provided by libraries like BlueZ and Pulseaudio, see our for details). Does not add Bluetooth Low Energy (Bluetooth 4.0) capability to Windows 7 and earlier. Does not work in car stereo systems, home theater systems, or TVs.Note: Some devices have specific compatibility concerns, please see supported Bluetooth profiles and the FAQ section particularly with regards to game controllers and audio devices. Description Plugable’s Class 2 Bluetooth 4.0 adapter’s dual mode radio will enable your computer to communicate with other Bluetooth devices with high speed transfer rates of up to 3 Mbps. With a range of up to 10 meters (33 feet) depending on environmental factors.

The adapter is compatible with both 32 and 64-bit Windows from XP through Windows 10. And offers market-leading Broadcom BCM20702 chipset, while also backwards compatible with classic Bluetooth (1.x and 2.x) devices. A2DP, AVCTP, AVDTP, AVRCP, GAVDP, GATT, HCRP, HFP, HSP, HID, HID over GATT, OPP, PAN, SPP, and more. The latest information regarding profiles and support in Windows and Linux can be found on our.

Note: Some profiles may require installation of included Broadcom Bluetooth Software or to use the built-in Windows stack. Bluetooth LE profiles are not supported on Windows 7 and earlier. Linux profile support is provided through. BlueZ and Pulseaudio versions vary between Linux distributions. Driver Installation. Remove its driver. Also, be sure to uninstall any bluetooth software from “Programs and Features” in the Control Panel.

If your computer has a built-in Bluetooth adapter, we recommend using it instead of purchasing our adapter, especially in Windows 10. Many built-in adapters are integrated with the Wi-Fi hardware and disabling the Bluetooth adapter may disable Wi-Fi support. Windows 10 frequently re-enables disabled built-in Bluetooth adapters, which will cause the Plugable adapter to stop functioning.

If you must install the Plugable adapter because your built-in adapter does not work, please contact us at support@plugable.com for assistance. Windows 8: (Legacy – 12.0.0.9980). Windows 8.1: Install the latest driver from one of the links below.

If you encounter issues, please contact us at. (Latest – 12.0.1.940). (Latest – 12.0.1.940). Windows 7 & Vista: In most cases, which is included on the CD, should work. If you are using a newer audio device that is not working with this driver, please contact us at or try one of the drivers from the links below. (Latest – 6.5.1.6930).

(Latest – 6.5.1.6930).: Use only in 32-Bit and 64-Bit Windows 7 and Vista. Windows XP: (Latest – 5.6.0.9110) Click For Linux Driver Installation. Linux kernels after June 2012 or so have support for this adapter. Support has been back ported to kernels back to later point releases of stable kernels 3.0+, specifically, and all versions of.The adapter’s USB VID is 0x0a5c (Broadcom) and PID 0x21e8. While the adapter can be installed with the kernel versions mentioned, this primarily allows Linux to recognize the adapter as a Bluetooth radio.

Bluetooth profile support, and most Bluetooth operations, are managed with software like and, which have varying degrees of functionality depending on which version of these libraries are installed, and the Linux kernel needed for different versions of those software components. Self-Help Quick Information FAQ. A: This a Bluetooth Class 2 device. Its range is specified at 10 meters or about 32 feet. That assumes an open space without any obstructions such as walls or floors. If you are not getting that range and there are no obstructions, there is likely a problem of radio interference. We see this most often if the adapter is connected to the back of a desktop computer, where there can be a lot of random radio noise generated by the processor and system parts.

Moving the adapter to the front of the computer often helps, as does using a USB 2.0 extension cable to move the adapter away from the computer. You can also use a to move your adapter closer to the receiving device. Poorly shielded USB 3.0 ports. If your device is having range issues when plugged into a USB 3.0 port, a USB 2.0 extension cable can help with this too. Multiple Wifi access points in the vicinity can also cause interference, since Wifi signals are much stronger than Bluetooth. Bluetooth automatically avoids channels that have strong Wifi signals, but if all the local channels are dominated by strong Wifi, the Bluetooth signal has no place to go. If your device has range issues, please don’t hesitate to contact us at.

A: In the latest version of iTunes, Apple has made changes that can cause disconnections in Windows 7. This fix usually solves the problem: 1. Open Explorer (the folder icon pinned at the bottom of the desktop near the Start button). Navigate to C: Program Files WIDCOMM Bluetooth Software 3.

Usb bluetooth adapter for mac

Find BtITunesPlugin.exe 4. Right-click it and select “Rename” 5. Change the name to OldBtITunesPlugin.exe. Restart the computer. Make sure your Bluetooth headphones, headset, or speaker is connected. Test it by playing a Youtube video through your internet browser.

Ivt Usb Bluetooth Drivers For Mac Download

If it doesn’t play, right-click the speaker icon, select Playback, then on the Playback tab of the Sound window, make sure the audio device is listed. If it is, right-click the icon and make sure it is selected as the Default Device.

If the audio device plays, open iTunes. If you see the error message again, please contact us at support@plugable.com. Otherwise select a long playlist and play it. You can play several playlists one after another. If audio plays, let iTunes play for a while and check periodically to see if the Bluetooth audio is still working.

If this does not help, please contact us at support@plugable.com. A: Because the maximum throughput of Bluetooth is much slower than even a USB 2.0 port, the higher speed of the USB 3.0 port (now known as USB 3.1 Gen 1) offers no advantage. Also, the adapter itself is a USB 2.0 device. Meanwhile, there is a critical flaw in the design of USB 3.0.

While this interference can be reduced through heavy shielding, it cannot be entirely avoided. USB 2.0 ports do not have this issue. However, a USB 2.0 port that is in close proximity to an in-use USB 3.0 port may also be affected by radio noise leaked by it. A: Components inside a tower-style computer case are largely exposed, and there is very little shielding to reduce the radio interference they produce. This is particularly true at the rear input/output panel of a PC. This is why cables that are designed to plug into the back of a computer often have a attached to them, to reduce radio interference.

Also, the Bluetooth signal weakens as it travels through the metal and plastic case and goes past the noise-producing components. Source: If you don’t have a port available on the front your PC, consider using a USB 2.0 hub to add ports located away from the back of your PC, or use a USB 2.0 extension cable to move the adapter to a location in line-of-sight with your receiving device. A: First verify that the audio services are connected: 1. Right click on the Bluetooth icon in the lower right system tray, select Show Bluetooth Devices. Right click on the headphone and select Control 3. Make sure that the headset is powered on and click Connect under Headset Operations Next, verify that the headset is set as the default audio output: 1. Open the Sound Control Panel (type in Sound in the StartSearch field) 2.

Select the Bluetooth headset and click Set Default, and OK Note: To use Win XP or Win 7 with a stereo headset, the Broadcom driver software must first be installed from the CD or from this webpage. A: In Windows, iTunes doesn’t work with Bluetooth the way most programs do. You have to specifically allow Bluetooth playback in the iTunes preferences. Please try the following: 1) Open iTunes and click the little black and white square icon in the upper left corner.

2) Click Preferences and click on the Playback tab at the top of the pop-up window. 3) Near the bottom of the window you’ll see Play Audio Using.

Open the dropdown menu next to it and select Direct Sound. 4) Click OK and close the pop-up window. 5) Restart iTunes.

You should now be able to play music through your Bluetooth headphones or speaker. A: All previously installed Bluetooth drivers should be removed and built-in adapters should be disabled prior to installing the Broadcom driver. Follow the below steps to verify if you have any pre-existing Bluetooth adapters installed: – Open Device Manager and expand the Bluetooth or Bluetooth Radios section: The Plugable Bluetooth adapter will show up as “Broadcom BCM20702 Bluetooth 4.0 USB Device.” “Microsoft Bluetooth Enumerator” is also a required component. Any other Bluetooth adapters listed here should be removed and disabled, e.g. Generic Bluetooth Adapter in the above image.

Note: Windows 8, 8.1 and 10 also display connected Bluetooth devices in this list. Only Bluetooth adapters need to be removed. To remove a Bluetooth adapter: – Right click on the adapter on this listPropertiesDriver tab, click Uninstall. Check the box for “Delete the driver software for this device” – Right click on the adapter and select Disable – Open Programs and Features, uninstall any Bluetooth programs listed prior to installing Broadcom drivers for the Plugable adapter.

A: Try the following procedure:. If you have an anti-virus program running, disable it prior to installing the Broadcom driver. Type in services.msc in Start Search to open list of services. From the list of items, double click Bluetooth Support Service.

Change the startup type to Automatic and click the Start button to start the service (Check for the dependencies of this service and make sure these are also set to automatic). Click Apply and then click OK. After the above, try plugging in the Bluetooth adapter and go through driver installation again.

A: Usually this happens because the device isn’t making itself visible for pairing. A device that wants to be seen by other devices broadcasts a special radio signal that makes it visible to any other Bluetooth device nearby.

This is called being “discoverable” or “visible” and is part of the Bluetooth pairing process. Sometimes a headset, headphones, or other device may not be visible for pairing either even if you’ve gone through the pairing procedure indicated in that device’s instructions. This may be because it is only allowed to pair with a single device at a time, and it is already connected to a phone, tablet, or other host device. Try disabling Bluetooth on any other devices you have previously connected your Bluetooth device to and try connecting to your computer again.

Discoverable mode is turned off by default on computers and phone/tablets for security reasons. Instead, the phones/tablets and computers act only as a host device and search for other devices like keyboards or headsets that broadcast their presence instead of becoming discoverable or visible for pairing. To solve this problem with a phone/tablet to your computer, you need to make either the phone/tablet or the computer temporarily discoverable, then search for it from the other one. Below are instructions for some common devices. For devices not listed here, see the user guide or instruction manual for that device, or search for “make discoverable in bluetooth” on the web.

Usb Bluetooth Drivers Windows 10

IOS (iPhone, iPad) Your iOS device will become discoverable when you go to Settings General Bluetooth. It will remain discoverable as long as you stay on the Bluetooth menu page. Android Versions 2.2 and 2.3 (Froyo and Gingerbread) Open Settings. Press Wireless & Networks. Press Bluetooth settings. If Bluetooth is not already on, touch it to turn it on. Touch Discoverable.

Your phone/tablet will stay discoverable for 120 seconds. Android Versions 4.0, 4.1, 4.2, 4.3, 4.4 (Ice Cream Sandwich, Jelly Bean, KitKat) Open Settings. Slide the Bluetooth switch to the On position.

Touch Bluetooth. At the top will be the name of your device and the words “Not visible to other Bluetooth devices.” Touch this to change it to “Visible to all nearby Bluetooth devices.” Touch it again after pairing with your computer to turn it off again. Android Versions 5.0, 5.1 (Lollipop), 6.x (Marshmallow), 7.x (Nougat) Open Settings. Tap Bluetooth. You device will remain discoverable as long as this screen is displayed. Windows 10, 8.1, 8 Press Windows Key + D to go to the Desktop.

Click Bluetooth in the System Tray. Select Open Settings.

Ivt Usb Bluetooth Drivers For Mac Windows 10

Place a check next to “Allow Bluetooth devices to find this computer.” Be sure to turn this off after pairing is successful. Windows 7 Click Bluetooth in the System Tray. Select Open Settings. Place a check next to “Allow Bluetooth devices to find this computer.” Be sure to turn this off after pairing is successful. Windows XP Right-click Bluetooth in the System Tray. Select Bluetooth Configuration. Click the Accessibility tab.

Place a check next to “Let other Bluetooth devices discover this computer.” Be sure to turn this off after pairing is successful.

⇐ ⇐ Amplifer Advice For Mac
⇒ ⇒ Sharp Ar-bc320 Drivers For Mac